UbiBot RS485 TH30S-B Temperature and Humidity Probe, Temperature Humidity Sensor Combined in One Probe, Monitor -40 to 80 C,0 to 100% RH, Audio Plug Connector
Matches with Our GS1-AETH Device only
● Audio plug
● Wide monitoring range: -40 to 80 ℃/ 0 to 100% RH
● Accurate readings, remotely accessbile
● Rain / spray / dust resistant
● Pairs with GS1 device
- Temperature and humidity sensor, monitoring range: -40 to 80 ℃, 0 to 100% RH.
- Good quality with stainless steel probe.Durable in extreme conditions, such as extremely cold winter.
- Match up with our GS1-AETH sensing device. The data can be displayed on the clear LCD screen to give you an instant view.
- Embedded with RS485 interface, ready-to use Audio plug connector. Easy to deploy.
Combined temperature and humidity sensors into one probe, this external probe can monitor two metrics at one time, reducing cost and improving efficiency.
There are two versions of the plug: Micro USB and Audio plug. The Micro USB port is suitable for our sensing device WS1 Pro and the Audio plug is designed for the GS1 device.
The measurements are transferred to the devices, displayed on the large LCD screen and synced to the platform via network. So you can access the data instantly on the screen or remotely view them via our app or web console.
Please note, when connecting with our WS1 Pro device, only temperature readings can be displayed on the screen. While all the monitored sensor readings can be synced to our platform for your view via the App or the console. And the R&D team is proceeding on the development of new batch of screens so as to make both the temperature and humidity readings displayed on the screen.
Moderately waterproof and dustproof features enable you to deploy it in dusty greenhouse or somewhere highly humid.
The external sensors are disabled by default. Please enable them in the "Settings" page on the App or the console after inserting the probe into the device. In this case, the readings from the external probe are accessbile.