Description

UbiBot TH30S-B External Temperature and Humidity Probe, Temperature Humidity Sensor Combined in One Probe, Monitor -40 to 80 C,0 to 100% RH, Micro USB Connector

Matches with Ubibot WS1 Pro only(5m)

● Wide monitoring range: -40 to 80 ℃/ 0 to 100% RH
● Accurate readings, remotely accessbile
● Rain / spray / dust resistant
● Pairs WS1 Pro

Combined temperature and humidity sensors into one probe, this external probe can monitor two metrics at one time, reducing cost and improving efficiency.

There are two versions of the plug: Micro USB and Audio plug. The Micro USB port is suitable for our sensing device WS1 Pro and the Audio plug is designed for the GS1 device.

The measurements are transferred to the devices, displayed on the large LCD screen and synced to the platform via network. So you can access the data instantly on the screen or remotely view them via our app or web console.

Please note, when connecting with our WS1 Pro device, only temperature readings can be displayed on the screen. While all the monitored sensor readings can be synced to our platform for your view via the App or the console. And the R&D team is proceeding on the development of new batch of screens so as to make both the temperature and humidity readings displayed on the screen.

Moderately waterproof and dustproof features enable you to deploy it in dusty greenhouse or somewhere highly humid.

Kindly reminder:

This probe can only be connected to the lower USB port (USB2) on the WS1 Pro device.

The external sensors are disabled by default. Please enable them in the "Settings" page on the App or the console after inserting the probe into the device. In this case, the readings from the external probe are accessbile.

Introduction:

Integrated with temperature and humidity sensors, this probe can monitor two metrics at one time, reducing cost and improving efficiency.

The embedded RS485 interface ensures it to pair with our IoT device WS1 Pro (optional extra) to provide measurements in extreme conditions. We provide customers with customised Micro USB port so you get a ready-to-use product as you receive it. All the monitored sensor readings can be synced to our platform for your view via the App or the console.

How to connect to the device:

1. Connect the probe to the DOWN USB port.

2. Go to the Settings page in the app or the console to enable the RS485 button.

3. Press the power button once to trigger data sync.You will see the temperature data as EXT2 at the bottom right corner of the screen.

Specifications:

Size of Probe: 7.5*1.5cm (diameter)

Cable Length: 500cm (We are updating the cable length to 500cm recently. The specific condition depending on the model purchased)

Material: ABS

Pobe Material: PE

Connector: Micro USB

Power Supply Range: DC 5V to 12V

Operating Condition: -40°C to +80°C (-40°F to +176°F) 0 to 100% RH

Storage Temperature Range: -40°C to +80°C (-40°F to +176°F)

Accuracy: ± 0.3°C; ± 2%

Output Interface: RS485

Communications Protocol: Modbus

IP rating: IP 42 (Moderately waterproof and dustproof features enable you to deploy it in dusty greenhouse or somewhere highly humid.)

Wide range of monitoring, fitting your individual use case


Warehouse temperature and humidity monitoring The UbiBot TH30S-B external probe combines two sensors into one probe: temperature and humidity. It matches with our WS1 Pro device. Connected via the Micro USB connector, you are then able to have access to the conditions of the greenhouse.	Manage conditions of medical supplies Some medicals are sensitive to temperature changes. To keep them in good condition, you will need this probe to assist you. With a wide monitoring range of -40 to 80 Celsius degree, it fits in most of the refrigerators.	Take care of precious music instruments To better take care of the precious music instruments or other colletions, you need to know the general conditions around the day. This probe, pairing with our WS1 Pro device, helps you to detect and record the history and send you alerts when the threshold you set is crossed.