The WS1 allows you to wirelessly monitor your environment in real-time and gives you remote access to your data wherever you are in the world. All the data is automatically synchronised to our big data platform via WiFi.
Our cloud-based IoT platform offers advanced data analysis and management. Configure all of your devices in one Ubibot account by using the Ubibot App. It also allows you to setup real-time notifications - if a metric goes outside the range you specify, the platform will notify you through the app, by email or other methods, allowing you to respond promptly before costly damage happens. The IoT platform gives users access to both the real-time data and history via our mobile app or on any browser. We are now working with IFTTT (if this then that), allowing you to build custom link with other smart devices.
Switch the temp unit °F/°C and user calibration is available. The device can store over 300,000 records in its internal memory, which can protect your data against network failure. Even if the network fails, the UbiBot WS1 still stores readings, thus ensuring there are no gaps in the data history.
The data sync interval can be set by you. This allows you to balance battery life against frequency of data capture. With the default data sync interval of 15 minutes the device has a battery life of up to 4- 6 months using 2 AA alkaline batteries. Power-supply using Micro-USB is supported. You can check the battery voltage of the device remotely and set up rules to be notified when low-battery, network failure or sensor reading exceeds the setting range. Available rule alerts include Email, APP, SMS, Phone Call, HTTP API. Please note, charges may apply to SMS text and voice call alert modes. These two modes cost the balance of the credits in your account.
No subscription is needed. Free 200MB Cloud Storage enough to store data over 2 years on default settings. Export the data to CSV or PDF without extra charge.
External Probe Selection:
- UbiBot WS1 supports 1 external temperature probe. Temperature range and option can be found here.
- We recommend to buy On-board Port Splitter (One Male to Two Female) if you want to use external USB power-supply and external temperature probe at the same time.
Probe Connection Diagram:
Water Resistant / Rainproof Option for Outdoors:
The WS1 device is not water resistant. For outdoor usage, we suggest to use UbiBot water-resistant case.
- Set-up in seconds via Ubibot App or PC Tools. Connect using 2.4GHz WiFi, no hub required (5GHz WiFi not supported) . Easy data access anywhere via the App or web console. Works with IFTTT, allowing you to build automated link with other smart devices.
- Swiss-made sensor chips, accuracy ensured. Works in environments - 20ºC to +60ºC(-4 ºF to 140 ºF), 10% to 90% RH. External probes (B07FKCWPLY) can be connected in extreme conditions (-55ºC to 125ºC). Suitable for greenhouse, cold room, laboratories, cigar cabinet, instruments storage and more.
- Free history tracking. Free 200MB Cloud Storage enough to store data up to 2 years on default settings. Online data can be exported into computer in PDF or CSV files. The device also has large internal memory that can store up to 300,000 pieces of data, ensuring no history gap when network is down.
- User-oriented design. Custom settings are available with many features: 1. Measuring rate and sync rate: minimum 1-minute; 2. Temperature unit: Celsius and Fahrenheit; 3. Calibrate the readings on the platform end; 4. Individual device name settings, recognize the device among the list by a glance; 5. Power supply: 2 x AA batteries or Micro USB cable power.
- Customized alerts can be sent to multiple users. You can be notified when device goes offline, sensor readings out of the preset range, low battery, etc. Available alerts modes include Email, APP notification, HTTP API, IFTTT, SMS, Phone Call. Fees will apply to the SMS and phone call alerts.
Advanced Solution for Temperature and Humidity Monitor
The WS1 is able to measure temperature, humidity, ambient light,vibration with its internal sensors. It also supports external probe DS18B20 for additional measurements in special environment. All the internal and external readings can be viewed in the app at the same time.
It allows you to monitor your environment in real-time and gives you remote access to your data via our app and web console. So, wherever you are in the world, you can view the data in graphs from your Android / iOS phone, tablet, or computer.
Our cloud-based IoT platform offers advanced data analysis and management. By the app, you are able to manage all of your devices in one Ubibot account. Set alerts for sensor readings and offline status, the device will notify you by in-app notifications, email, IFTTT notifications, SMS text and also voice call, allowing you to respond promptly before costly damage happens. Please note, charges of credits in your account may apply when you choose SMS text and voice call alert modes.
There is no subscription fee. All devices comes with free plan that contains 200 MB online storage and 1 GB outbound traffic. The free storage is enough for up to 2 years usage. The platform supports free data export and PDF report. Once the storage is used up, you can delete the data and reuse.
The device also has large internal memory that can store 300,000 records, which means once the network disconnected, your data won't get lost.
The data sync interval can be set by you. This allows you to balance battery life against frequency of data capture. With the data sync interval of 15 minutes the device has a battery life of up to 4 to 6 months using 2 AA alkaline batteries.
We also open up our RESTful API, offering professional users the chance to develop their own monitoring solutions. If you need to deploy local API with our devices, we can also provide assist both in hardware and software.
Sensors' monitoring range:
Temperature sensor: -20 to 60℃, Humidity sensor: 10 to 90%, Ambient light sensor: 0 to 83klux
Optimal operational conditions: -20ºC to 60ºC (-4ºF to 140ºF) RH: 10% to 90%
*The sensor precision can be affected by extreme environmental conditions. We recommend you avoid using it outside the optimal operational conditions listed above. For usage in extreme conditions, you can conncet an external temperature probe to help with monitoring. The probe is also available in our store.
WiFi: 2.4GHz only, channels 1-13, WPA/WPA2, WEP, or OPEN security protocols. WPA2-Enterprise (802.1x/RADIUS authentication) network is not supported.
Limitations: 5GHz WiFi is NOT supported; web-based WiFi authentication is NOT supported (often see in a hotel, university and marina).
Power Source: 2 x AA batteries (alkaline battery recommended, not included) / Micro USB
External probe supported: 1 x DS18B20
On-board memory: 300,000 sensing records
App requirements: iOS 11+, Android 8.1+
IP rating: not waterproof. Please avoid usage outdoor without any shelter or in extreme humid environment with 90%+ RH.
Device Setting Available: Minimum Device Sync Interval (Upload) is 1 minute, and Minimum Sensing Interval is 1 minute (Temperature, Humidity, Light, External Probe and Battery Voltage).
Please note, this device is not waterproof. Please protect it from water leakage. The optimal operational environment is 10% to 90% RH. Long term of exposing to high humid environment over 90% may damage the circuit board and cause electrical leakage.
Multiple Sensors Embedded into One Device
The UbiBot IoT platform is a one-stop solution for all your IoT needs. Manage all your devices from one location. Take advantage of advanced analytics & visualisation, dynamic alerts and secure data storage to maximise the benefits of IoT for your business.
The UbiBot IoT Platform offers secure data management, intelligent alerts, and data analysis. You can receive alerts when any measurement goes outside the range you set. We also open up our RESTful API, offering you the chance to develop your own monitoring solutions.
Multiple Alerts Modes
The multi-channel configurable alerts ensure real-time alerts and give you peace of mind. You are allowed to set customised alerts through the settings page. Our alert service monitors your devices remotely. Receive alerts if any metric goes outside the range you set.
IoT SOLUTIONS FOR THE VALUABLE COLLECTIONS
Valuable collections such as instruments are extremely precious and need to be carefully preserved. The slightest change in temperature or humidity could damage them. The WS1 device could help to monitor the environment remotely and send alerts to the art gallery curators if conditions ever change.
A SMARTER WAY TO WATCH OVER YOUR GREENHOUSE
Temperature and humidity directly influence the health and yield of your crops. By using WS1 multi-sensor devices you can track the history of the growing environment and correlate this with crop yields. A smarter way to monitor your important crops and maximise your revenues. Because the WS1 offers automatic syncing of data, you can monitor conditions remotely through our App or via the UbiBot IoT Platform.
PROTECT YOUR BUSINESS WITH WIRELESS MONITORING
Servers are sensitive to extremes of heat and humidity. To keep them safe, you can deploy our WS1 device in the server room. With its accurate industrial-grade sensors, your server conditions are under well supevision. You will receive customised alerts when things are getting critical. We also offer data sharing features which promise more people keep an eye on the condition for a better monitoring.
1. Does the device collect data when the network is unavailable?
Yes. The device continues to monitor the environment even when no network is available. It stores the data in its on-device memory and will sync it when you move it to WiFi environment. Alternatively, you can manually export the data via our PC Offline Tool or WiFi AP.
2. How to reset the device when my WiFi router password is changed?
Repeat the device setup steps and follow the on-screen instructions. Note: you need to type in the new WiFi password. All your data are kept unchanged when you changed the WiFi password or even you move the device to a new location.
3. What kind of probe can be connected with the device?
The WS1 device supports 1 DS18B20 temperature probe. When you need both USB power supply and external probe connection at the same time, you can use the Micro USB Splitter Cable Adapter (One Male to Two Female).
4. Is there any subscription fee for using the platform?
There is no need of subscription to use the UbiBot Platform.
Each device comes with the free plan on UbiBot platform that offers 200 MB storage and 1 GB outbound traffic. The 200 MB storage is for lifetime and 1 GB of outbound traffic is rotated monthly for each device. But any balance of the outbound traffic will not roll over to the next month. For example, if you have 500 MB outbound traffic unused this month, you still have 1 GB next month. The free 200MB storage is enough to store over 2 years amount of data in case of your device takes temperature, humidity and light sensor readings every 10 minutes.
You can also pay for larger amount of storage and outbound traffic. Please go to the “Pricing” page to see details.
5. Can the device powered by USB power supply?
Yes. The device supports both AA batteires and Micro USB power(5V2A). The device can preferentially use USB power if both USB and batteries are available. In this case, you can insert 4 AA batteries as a backup for the power supply in case of socket power goes off.
Rechargeable batteries are also supported, but please note the device won’t charge them when USB supply is plugged in.
6. Why couldn't I receive the verification email for registration?
The email is probably blocked by your email server. Please check your spam or junk mail first. If there isn't, please send us your registration email address via email@example.com so as to check the status from our server end.