Skip to main content

UBIBOT EXTERNAL CO2 PROBE for GS1 Device

$1,082.99
(No reviews yet) Write a Review
Bulk Pricing:
Buy in bulk and save

Ubibot CO2 Monitor, Indoor Air Quality Probe, Carbon Dioxide 9999 ppm, Greenhouse CO2 Detector

(Matches with GS1 Device)

 

● Matches with Ubibot GS1 devices

● Readings can be displayed on the GS1 screen

● Remote access via the app or web console

● Multiple modes of alert notify you when the readings going over the normal range

 

  • Industrial-grade Measuring Range : CO2 : 0~10000ppm, Resolution: 0.1 ppm, Accuracy: +/- 10%
  • Easy deployment: Audio plug connector, suitable for GS1 device, plug and play. Two on-board holes, easy to mount on wall or plank by screws.
  • Wireless monitoring: This probe should to be connected to our GS1 device for data transmisson. With the device setup, you will be able to view the readings remotely wherever you are. You will notified when the preset threshold is crossed by email, app notification, IFTTT, SMS text, voice call.
  • No places limitation: The sensor comes with a 3-meter lead which allows you to extend it to as far away as you need. The extension cord (sold separately) is also supported for this sensor.
  • Use cases: Suits most of environments, such as laboratory, greenhouse, wine cellar, livestock farm, school, library, etc.

Supports GS1-AETH1RS Monitoring Device

air quality monitor

Introduction

This probe is Ubibot self-developed external Carbon Dioxide Probe. With industrial sensor, it can measure CO2 in a range of 0-10000 ppm, with accuracy of ±10% .

In many scenarios, CO2 plays an negative role, such as home, greenhouse, lab, etc. To prevent CO2 from harming our health, the grow of our plants, or the indoor air quality of the lab, you will need this probe to notify you when the set threshold is crossed.

To be designed as accessory of GS1 series of device, it features remote monitoring, smart alerts. With this probe, you don't need to keep watching the readings all the time. All the data of long term can be stored on our platform and accessed from the app and the web console. The custom alerts will notify you of sudden change or extreme conditions via app notifications, emails, SMS texts, voice call, IFTTT, etc.

By integrating with GS1 device, the other platform features will also be accessible to the CO2 data. Our platform works with IFTTT (if this then that), which supports automation with your other electronic appliances, such as fans, ventilation system.

Free data export, long term storage, data forwarding, are all accessible to the CO2 data, actually all the data on our system.

Specifications:

Cable Length: 300cm; Connector: Audio plug

Power Supply Range: DC 5 V to 12 V; Monitoring Range: 0~10000ppm

Accuracy: ± (30ppm + 3%); Resolution: 0.1ppm

Size of the Probe: 65*46*29mm

Baud Rate: 1200 bit/s,2400 bit/s, 4800 bit/s, 9600 bit/s, 19200 bit/s(optional)

Current: 20mA

Communication Protocol: MODBUS RTU

Output Interface: RS485

Communication Address: 0xC7

smart home

Access information about your home environment on the mobile app

Your Ubibot CO2 probe sends you all the information you need to know about your home environment directly to your smartphone. View your data history to track the evolution of the different parameters and receive alerts when your home environment changes.

 

farm air monitoring

Create a better environment for the fungus.

Proper oxygen and CO2 concentration in the fungus culture room is critical to the yield. To keep the CO2 in a proper level, you need to know when it rises so as to take some measures. With Ubibot GS1 and CO2 probe, you don't need to go to the room personally. By setting up the GS1 device and the rules, you can have peace of mind.

 

air quality sensor

Keep the CO2 away from animal breeding farm

Incubation room, honey bee farm and even cattle farm, are the places which need high quality air. To ensure a low level of CO2 in the condition, you will need to know the readings in real time. Getting alerts of CO2 increases can help you to take measures before damage happens. With Ubibot, all these can be achieved by wifi connection and app notifications.

 

high quality air condition

Accurate CO2 monitoring solution

In the lab, some tests have very high requirements for air condition. The stable rate of oxygen and CO2 will have direct impact on the test results. Therefore, to keep the optimal environment, you need to be aware of the readings all the time. With the custom alarm system, you will be free of staring the readings and have peace of mind.

 

 

This probe is Ubibot self-developed Carbon Dioxide Probe. With industrial sensor, it can measure CO2 in a range of 0-10000 ppm, with accuracy of ±10% .

In many scenarios, CO2 plays an negative role, such as home, greenhouse, lab, etc. To prevent CO2 from harming our health, the grow of our plants, or the indoor air quality of the lab, you will need this probe to notify you when the set threshold is crossed. 

As one accessory of GS1 device, it needs connection to the GS1 series of devices, such as GS1-AL4G, GS1-AETH, ect. With this probe, you don't need to keep watching the readings all the time. All the data of long term can be stored on our platform and accessed from the app and the web console. The custom alerts will notify you of sudden change or extreme conditions via app notifications, emails, SMS texts, voice call, IFTTT, etc.

By integrating with GS1 device, the other platform features will also be accessible to the CO2 data. Our platform works with IFTTT (if this then that), which supports automation with your other electronic appliances, such as fans, ventilation system.

Free data export, long term storage, data forwarding, are all accessible to the CO2 data, actually all the data on our system.

You can find the GS1 series device here: 

UbiBot GS1-AETH1RS
UbiBot GS1-AL4G1RS

- On-board Port Splitter. This splitter can ensure connecting more than one external probes on the GS1 device at a time.